I recently started using my grandma's old sewing cabinet in my craft room and paired it with my husband's grandma's sewing chair. It made a perfect duo and the chair is exactly the right height. I was not too fond of the material on the chair since it goes with nothing in our home. I had one piece of my shabby chic material that I used for the DIY Shabby Chic Ottoman Project and a few other little projects, so I decided to use that. Then the chair can serve as an extra dining room chair when we are all together for special occasions.
I tipped the chair upside down and removed the 4 screws underneath and the seat fell off, just what I wanted! So I measured my material, leaving a couple of inches all the way around the outside. I cut the material and using my rather new staple gun, stapled 2 sides, then stapled the other 2 sides folding the ends like the ends on a present. One side underneath and then fold the remaining corner over the top, staple and done!
My new old sewing chair! I love doing projects with items from the family, they are the most special!
Love and peace,
~ Simply Tammi
I tipped the chair upside down and removed the 4 screws underneath and the seat fell off, just what I wanted! So I measured my material, leaving a couple of inches all the way around the outside. I cut the material and using my rather new staple gun, stapled 2 sides, then stapled the other 2 sides folding the ends like the ends on a present. One side underneath and then fold the remaining corner over the top, staple and done!
My new old sewing chair! I love doing projects with items from the family, they are the most special!
After |
Before
|
~ Simply Tammi